Chamfer cutters are an essential part of the toolkit of any metalworker or woodworker. With these tools, it’s possible to craft sharp and precise 90-degree chamfers on the edges of metal pieces or wooden planks, or to carve intricate shapes and designs into them.
A wide assortment of sizes and styles of chamfer cutters are at our disposal; however, the most frequently-employed variety are crafted from high-speed steel. These tools are ideal for use in a drill press or milling machine, able to cut through materials up to 3/8” thick with great efficiency.
If you’re looking for an effective way to cut through metals and woods, the most common choice is the two flute HSS chamfer cutter. It offers a perfect balance of performance and reliability. For softer materials like aluminum or brass, however, you should opt for the four flute design of the same cutter for the best results.
Chamfer cutters are typically associated with creating the angled, beveled edges we see on metal or wood components. But they can also be utilized to craft designs and figures in their own right. In such circumstances, chamfer cutters are more aptly referred to as “pattern cutters”.
To get the best results when using chamfer cutters, it is essential to select the right size and type for the material in question. Additionally, as the cutting process is underway, be sure to do so at a steady pace. Doing so will eliminate the possibility of the blade breaking or damaging the material.
When using a chamfer cutter, it is essential to remember that the blade should only be pushed forwards. If you try to cut while the blade is pulling back, it can critically damage the cutter and could cause you to receive a nasty injury.
Chamfer cutters are a go-to implement for many woodworkers and machinists due to their capacity for accurate usage when wielded properly. With a bit of practice, these tools can be utilized to craft pristine 90-degree chamfers or to etch complex patterns and configurations onto material.
Related Product
Single Crystal Diamond Polishing Cutter
Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]
MCD Polishing Cutter for Gold Silver
Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]
MCD Turning Tool Mirrow Finish R Cutter
Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]
CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter
Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]
MCD High Gloss Chamfer Cutter For Gold
Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]
Diamond Turning Tools Outer Jewelry R Cutter
Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]
Lathe Bits MCD High Gloss Chamfer Tool
Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]
Post time: 2023-07-07
