A number of materials are utilized for the production of carbide engraving tools, such as Carbide, High Speed Steel (HSS), and Cobalt. Tool speed is determined by measuring the rotations per minute (RPM) created by the tool bit, while feed rate is indicated in inches per minute (IPM) via the speed of the tool bit traversing the workpiece.
Achieving the desired results from carbide engraving requires thoughtful consideration of both tool speed and feed rate. Finding the perfect equilibrium between the two can significantly boost the quality and efficiency of the outcome.
The velocity of the system is determined by both the composition of the cutter and the cuts being shaped. For instance, a cutter created from Carbide can tolerate faster speeds than one made from HSS. Additionally, the speed of the tool bit is also dependant upon how indented the cuts are.
The feed rate is contingent on the breadth of the incisions being delineated. Incisions that are wider demand a higher feed rate to be maintained. Additionally, the kind of tool bit being employed also governs the rate – carbide tools can sustain a more rapid feed rate than HSS instruments.
The tool speed and feed rate must be thoroughly considered to ensure successful results. Too rapid a velocity for the tool bit may cause it to disintegrate, while excessive feed rate can detrimentally affect the final product’s caliber.
Below you’ll find the recommended rotational speed and rate of feed for carbide engraving cutters. With this data on-hand, you can look forward to achieving smooth and precise results with every engraving task.
Revolution Velocity of the Tool versus Intensity of Progression
Between Sixty Thousand and One Hundred Thousand – with a Range of Point Zero Zero Four to Point Zero One Two.
Approximately 20 thousand to 60 thousand 0.002 to 0.006
Approximately 20,000 to 40,000 – A Range of 0.002 to 0.004
Before utilizing a carbide engraving tool, it is prudent to seek out the manufacturer’s advice as the values may differ based on the particular tool and material being used – the table serving solely as a basic reference.
Related Product
CVD/PVD/MCD Gold Jewelry Diamond Engraving Cutter
Parameter Product Name Single Crystal Diamond Carving Cutter Rotating Speed 10000-30000r/min Tool Nose Width 0.1-6.0mm Feed 1500-5000mm/min Blade Material Single Crystal Dia […]
Single Crystal Diamond Polishing Cutter
Origin Tianjing, China Shank Diameter 6 (mm) Brand MSK Blade Change Method The Diamond Is Welded To The Cutter Body As A Whole Material Single Crystal Diamond (MCD) Scope Of […]
MCD Turning Tool Mirrow Finish R Cutter
Product Information Product Name Single Crystal Diamond Lower Chamfering Inner R Cutter Brand MSK Handle Material Tungsten Steel Blade Material Customized Pcd, Single Crysta […]
MCD Polishing Cutter for Gold Silver
Product Information Origin Tianjing, China Whether To Coat Uncoated Brand MSK Unit Weight 0.3kg Tool material Tungsten steel bar imported from Germany Product Size Shank Dia […]
Diamond Turning Tools Outer Jewelry R Cutter
Product Information Origin Tianjing, China Material Tungsten Steel Brand Msk Type Half Round Key Milling Cutter Product Name Single Crystal Diamond Side Edge Arc Milling Cut […]
Lathe Bits MCD High Gloss Chamfer Tool
Product Information Origin Tianjing, China Cutting Edge Form Straight Edge Brand MSK Material Single Crystal Diamond Chamfer Angle 30°-180° Type Angle Milling Cutter Minimum […]
MCD High Gloss Chamfer Cutter For Gold
Product Information Origin Tianjing, China Type Flat Milling Cutter Brand Msk Whether To Coat Uncoated Series Cutter Milling Cutter Processing Range Clocks And Watches, Copp […]
Post time: 2023-06-22
